Power Supply Board for HP LaserJet Pro M401dn / MFP M425dn Original Imported

Original Power Supply Board for HP LaserJet Pro M401dn / MFP M425dn — Imported

Get your HP LaserJet Pro back to life with the PRM Original Power Supply Board. This is a genuine original board — not a compatible copy — sourced from original equipment and imported directly. One board fits the entire M401/M425 series.

Looking for an HP M401 power supply or HP M425dn power board? This is the correct power supply board for the entire range.

When Do You Need a New Power Supply Board?
The power supply board converts mains AC power into the regulated DC voltages that run every component inside your printer — the formatter, fuser, motor, scanner, and display panel. When it fails, the entire printer is affected. Replace your power supply when you see:
- Printer completely dead — no lights, no display, no response when pressing the power button
- Printer turns on briefly then shuts off immediately
- Random shutdowns during printing — printer dies mid-job
- Fuser error or 50.x error — the power supply feeds the fuser heater; a weak supply causes temperature errors
- Burning smell from the power supply area (not from the fuser)
- Printer takes unusually long to warm up or never reaches ready state
- Display panel freezes, goes blank, or flickers during printing
- Ethernet/network connection dropping intermittently
- Tripping your office power switch when the printer turns on

If you've checked the power cable, tried a different wall socket, and the printer still won't power on or keeps shutting down — the power supply board is almost certainly the cause.

1. One Board Fits the Entire M401/M425 Range: This power supply board is compatible across the HP LaserJet Pro M401d, M401dn, M401dw, M401n, MFP M425dn, and MFP M425dw. Same board, same connectors — works in all models whether single-function or multifunction.

2. Original, Not Compatible: This is a genuine original HP power supply board — the same board that came inside your printer from the factory. Original boards offer exact voltage regulation and long-term reliability that compatible copies cannot match. For a critical component like the power supply that feeds every part of your printer, original is the right choice.

3. Fixes the "Dead Printer" Problem: The most common power supply failure symptom is a completely dead printer — no lights, no response. The M401/M425 are workgroup-class printers rated at 33 pages per minute, found in offices across India. Before you replace this reliable machine, a power supply board swap brings it back to life at a fraction of the cost.

4. Resolves Fuser Errors Without Replacing the Fuser: Many fuser errors on the M401/M425 are actually power supply problems — the board can't deliver enough power to heat the fuser properly. If you've already replaced the fuser and still get temperature errors, the power supply is the fix.

5. Restores All MFP Functions (M425): The M425dn and M425dw are full multifunction printers — print, scan, copy, and fax are all powered by this one board. A failing supply can cause seemingly unrelated problems across all functions. A new board restores stable power to everything.

6. Restores Duplex and Network: All dn/dw models support automatic two-sided printing and Ethernet networking. A failing supply often shows symptoms during duplex jobs first — the printer shuts down or throws errors. A new board restores stable duplex and network operation.

7. Easy Installation: Disconnect the printer from mains power, remove the side/rear panels, unplug the connectors from the old power supply board, swap in the new one, reconnect all cables, and reassemble. 20-30 minutes for any printer technician. Basic screwdriver needed.

8. Tested Before Shipping: Every PRM power supply board is tested for correct voltage output before dispatch. Backed by our testing warranty.

Compatible Printers:
HP: LaserJet Pro M401d, M401dn, M401dw, M401n, LaserJet Pro MFP M425dn, M425dw

Also known as: HP M401 Power Supply, HP M425 Power Board, HP M401dn Power Supply Board, HP M425dn SMPS Board, HP M401dw Power Supply, HP M425dw SMPS, HP Pro 400 Power Supply Board