Fuser Assembly for HP Color LaserJet Pro M452 / M377 / M477 / M479 Compatible Imported

Compatible Fuser Assembly for HP Color LaserJet Pro M452 / M377 / MFP M477 / MFP M479 — Imported

Get your HP Color LaserJet Pro back to life with the PRM Compatible Fuser Assembly. This imported fuser unit is a direct replacement for the original HP fuser — restoring clean, jam-free, vibrant colour printing when the original fuser wears out. One fuser fits the entire M452/M377/M477/M479 series.

Looking for an HP M452 fuser unit, HP M477 fuser assembly, or HP M479 fuser? This is the correct fuser assembly for the entire range.

When Do You Need a New Fuser Assembly?
The fuser assembly is the part of your printer that uses heat and pressure to bond toner powder permanently onto the paper. In a colour laser printer, the fuser bonds all four colours (cyan, magenta, yellow, and black) simultaneously. Over time, the heating element and pressure roller wear out. Replace your fuser when you see:
- Paper jamming inside the printer, especially at the rear exit
- Wrinkled, crumpled, or curled pages coming out
- Toner smudging or rubbing off the page — colour prints smear when you touch them
- Ghosting — faint repeated images or colour shadows appearing down the page
- Colours looking dull, washed out, or not fusing properly to paper
- Burning smell coming from the printer during printing
- "Fuser error" or "50.x error" on the display panel
- Slow printing — printer pauses between pages to let the fuser cool down
- Wavy or distorted prints, especially on the edges
- Glossy or shiny patches on printed pages where toner hasn't fused evenly

If you've already replaced the toner cartridges (HP 410A / CF410A series for M452/M477 or HP 416A / W2040A series for M479) and prints still smudge, jam, or show colour issues — the fuser assembly is almost certainly the cause. Toner issues affect colour accuracy and darkness; fuser issues affect how the toner bonds to the paper.

1. One Fuser Fits the Entire M452/M377/M477/M479 Range: This fuser assembly is compatible across the HP Color LaserJet Pro M452dn, M452dw, M452nw, M377dw, MFP M477fdn, M477fdw, M477fnw, MFP M479fdn, M479fdw, and M479fnw. Same fuser unit — works in all models across the series.

2. Restores All MFP Functions (M377/M477/M479): The M377, M477, and M479 are full colour multifunction printers — print, scan, copy, and fax. While the fuser only handles the print/copy output, a jamming or smudging fuser disrupts every function that puts toner on paper. A new fuser restores clean, vibrant output across all functions.

3. Restores Colour Print Quality: In a colour laser printer, the fuser must apply perfectly even heat and pressure across the full page width to bond all four toner colours properly. A worn fuser causes uneven fusing — resulting in dull colours, shiny patches, or toner that flakes off. A new fuser restores consistent, professional colour output.

4. Fixes Paper Jams at the Source: Most recurring paper jams in these printers are caused by a worn fuser film or a hardened pressure roller. A new fuser assembly eliminates the jam point completely — no more pulling crumpled paper out of the printer.

5. Stops Toner Smudging: If your colour prints look fine but the toner rubs off when you touch the page, the fuser isn't reaching the correct temperature to bond toner to paper. A new fuser restores proper heat and pressure, giving you smudge-proof prints.

6. Eliminates Ghosting: Ghost images and colour shadows happen when the fuser retains toner residue from previous prints. A fresh fuser eliminates this problem immediately.

7. Restores Duplex Printing: All models in the M452/M377/M477/M479 series support automatic two-sided printing. A failing fuser often causes jams specifically during duplex printing — paper curls after the first side and jams when it re-enters for the second side. A new fuser fixes this.

8. Compatible Imported Quality: China-manufactured compatible fuser delivering reliable performance at a fraction of the original HP fuser cost. Colour printer fusers are particularly expensive from HP — a compatible fuser keeps your colour LaserJet running without the premium price tag.

9. Easy Installation: Open the rear door, release the fuser locking levers, slide out the old fuser, slide in the new one, lock it in place, and close. 15-20 minutes for any printer technician. No special tools needed.

10. Tested Before Shipping: Every PRM fuser assembly is heat-tested before dispatch to ensure the heating element and pressure roller are working. Backed by our testing warranty.

Compatible Printers:
HP: Color LaserJet Pro M452dn, M452dw, M452nw, M377dw, MFP M477fdn, M477fdw, M477fnw, MFP M479fdn, M479fdw, M479fnw

Also known as: HP M452 Fuser Assembly, HP M477 Fuser Unit, HP M479 Fuser Assembly, HP M377 Fuser Unit, HP M452dn Fixing Assembly, HP M477fdw Fuser Kit, HP M479fdw Fuser Unit, HP Color LaserJet Fuser Assembly, RM2-1834