Power Supply Board for Canon imageCLASS MF3010 Original Imported

Original Power Supply Board for Canon imageCLASS MF3010 — Imported

Get your Canon imageCLASS MF3010 back to life with the PRM Original Power Supply Board. This is a genuine original board — not a compatible copy — sourced from original equipment and imported directly.

Looking for a Canon MF3010 power supply or Canon MF3010 power board? This is the correct power supply board for your printer.

When Do You Need a New Power Supply Board?
The power supply board converts mains AC power into the regulated DC voltages that run every component inside your printer — the formatter, fuser, motor, and scanner. When it fails, the entire printer is affected. Replace your power supply when you see:
- Printer completely dead — no lights, no response when pressing the power button
- Printer turns on briefly then shuts off immediately
- Random shutdowns during printing — printer dies mid-job
- Fuser error messages — the power supply feeds the fuser heater; a weak supply causes temperature errors
- Burning smell from the power supply area (not from the fuser)
- Printer takes unusually long to warm up or never reaches ready state
- Error lights blinking in a pattern that indicates a power fault
- Scanner lamp not turning on during scan/copy
- Tripping your office power switch when the printer turns on

If you've checked the power cable, tried a different wall socket, and the printer still won't power on or keeps shutting down — the power supply board is almost certainly the cause.

1. India's Most Popular Canon Printer: The MF3010 is one of the best-selling laser printers in India — found in homes, schools, offices, and photocopy shops everywhere. Before you replace this reliable workhorse, a power supply board swap brings it back to life at a fraction of the cost of a new printer.

2. Original, Not Compatible: This is a genuine original Canon power supply board — the same board that came inside your MF3010 from the factory. Original boards offer exact voltage regulation and long-term reliability that compatible copies cannot match. For a critical component like the power supply that feeds every part of your printer, original is the right choice.

3. Fixes the "Dead Printer" Problem: The most common power supply failure symptom is a completely dead printer — no lights, no response. This is the single most common repair on the MF3010 after years of use. A new power supply board is all it takes.

4. Resolves Fuser Errors Without Replacing the Fuser: Many fuser errors on the MF3010 are actually power supply problems — the board can't deliver enough power to heat the fuser properly. If you've already replaced the fuser and still get temperature errors, the power supply is the fix.

5. Restores All MFP Functions: The MF3010 is a multifunction printer — print, scan, and copy are all powered by this one board. A failing supply can cause seemingly unrelated problems across all three functions. A new board restores stable power to everything.

6. Easy Installation: Disconnect the printer from mains power, remove the side/rear panels, unplug the connectors from the old power supply board, swap in the new one, reconnect all cables, and reassemble. 20-30 minutes for any printer technician. Basic screwdriver needed.

7. Tested Before Shipping: Every PRM power supply board is tested for correct voltage output before dispatch. Backed by our testing warranty.

Compatible Printers:
Canon: imageCLASS MF3010

Also known as: Canon MF3010 Power Supply, Canon MF3010 Power Board, Canon MF3010 SMPS Board, Canon MF3010 Power Supply Board, Canon imageCLASS MF3010 Power Supply